Welding tables for large steel constructions movable on rails

Weld large steel structures on moveable table surfaces.

Welding tables on rails can be used for this construction areas:

  • Wagons
  • Bodyworks
  • Railings
  • Bridges
  • Hangars
  • Steel processing
  • Structural Engineering
  • Cranes

The welding tables or surfaces on leveled rails can be used and locked in parallel or connected to each other in a row in the entire hall area.

In that case the rails are equipped with

• the corresponding actuators in the floor
• or mounted flat on the floor

The welding tables and surfaces are covered with Grey Cast Iron or Al/CU rails. These rails form a system based on T-Slots in which the clamping equipment can be fastened.

The table surfaces are moveable and lockable adjusting the desired measures through a brake stop.

Adjust the length of your parts

Lock a table surface with the brake stop at one of the ends of the track. The long side of the table surface can be used as edge guide. The distances (depending on the parts size) to the other welding tables and surfaces on the moving track can be measured from this edge.

Clamp the workpieces

The workpieces can be clamped through the T-Slot system with our optional welding accessories.

Movable table bridges
Pictures
Welding Tables On Rails
Welding Tables On Rails
Welding Tables On Rails
Welding Tables On Rails
Welding Tables On Rails
Welding Tables On Rails
Welding Tables On Rails